A Modest Non-Rocket Launch Proposal

On the aRocket list, we get the occasional individual proposing methods to put payloads into space using mega-structures instead of rockets. This is in response to the suggestion of dropping the payload down and out a hole though the center of the Earth using a drop tower, though it could be rewritten for most novel space launch concepts.

***

A modest proposal for preventing the theorist from being a burden to this list, and for making a non-rocket space-launch that is beneficial to the publick.

You don’t need a drop tower; what you need is an elastic collision at the center of the Earth. Imagine a mass of weight 1 kg at the center of the Earth and a mass of 10 kg dropped from the Earth’s surface down a tube. At the collision, the 10 kg mass is travelling 8 km/s. After a perfectly elastic collision, the devising of which is left as an exercise to the reader, The 10 kg mass is travelling at 6.5 km/s and, more importantly, the 1 kg mass is traveling at 14.5 km/s! This speed decreases to 12.1 km/s at the surface which is more than enough speed to escape the Earth (11.2 km/s escape velocity). Low drag, converting velocity into the desired direction, and aerothermal heating are left as exercises to the reader. See Figure 1.

Figure 1: Elastic collision gravitational launcher
Figure 1: Elastic collision gravitational launcher
 Now, you may ask, why bother going to the center of the Earth at all. Isn’t it a deep, hot hole and, thus, quite hard to drill? Why not just string together our perfect momentum transfer system into a series of bounces at the Earth’s surface to achieve high velocity. If we start with a moderate velocity of 0.3 km/s, easily achievable, and our 10-1 mass ratio, we achieve orbital velocity in 6 bounces! Unfortunately, at a mass ratio of 100000-1. Well, if we increase the initial speed to 2 km/s, still in the relatively easy range, we only need 4 bounces for escape velocity with a 1000-1 mass ratio. Hmm. Let us drop the mass ratio down to 2-1. Now we need 7 bounces but we achieve a 32-1 mass ratio which is not bad at all. See Figure 2.
Figure 2: Elastic collision rail launcher
Figure 2: Elastic collision rail launcher

Perfectly elastic collisions are hard to achieve in large objects, but we can mimic them by throwing mass 2 off of mass 1; we just need a rail to accelerate mass 2 located on mass 1 and, instead of using stationary power, we have to beam the power to the moving mass 1. Beaming high power is left as an exercise to the reader. Now we can aim the masses and don’t have to stick to a fixed track, so we can achieve any given orbit! See Figure 3.

Figure 3: Sequential beamed power mass accelerator
Figure 3: Sequential beamed power mass accelerator

But we have to build all of these masses and mass drivers and that could be expensive. If we would stop and think for a moment, we see that we could just build one large flying mass and throw a number of smaller masses off of it. On the plus side, we lose weight as we shoot out mass which makes each additional mass add more velocity. If we stick with our 2 km/s mass driver, we have to go down to a 20-1 mass ratio (initial mass ratio) and it takes 19 pushes to achieve orbital velocity with a 20-1 mass ratio. But we only need one rail to achieve this! See figure 4.

Figure 4: Beamed power reaction mass driver
Figure 4: Beamed power reaction mass driver

Beaming power is hard and unproven technology. But we could generate the power on board, either through nuclear or chemical reaction. This might take up a fair bit of the mass on the flying shooter mass but, it if all else fails, we can always just up the mass ratio to accommodate the generator. Also, to keep the generator from having to store energy between shots, the shot mass should be made as small as possible. Deriving the ideal shot out mass for final speed when using a very large number of small shot masses is left as an exercise to the reader. See Figure 5.

Figure 5: Power generated shot reaction driver
Figure 5: Power generated shot reaction driver

But wait! Two more finishing touches and we might make a practical system yet. It may be possible to find a way for the shot mass to generate the energy before it is thrown overboard. We can make the shot out of a variety of chemicals that generate energy when combined, for example the thermite reaction Fe2O3 + 2 Al → 2 Fe + Al2O3. + heat. Better yet, many of these reactions have gaseous by products and gasses are easy to accelerate using a simple converging diverging nozzle. For example, O2 +  3 H2 = 2 H2O+ H2 + heat which, at the reaction temperatures, are gasses the can be accelerated easily to 4 km/s which rather simplifies the shot accelerator design. Determining the optimal chemicals is left as an exercise for the reader. See Figure 6.

Figure 6: Stored energy shot reaction drive
Figure 6: Stored energy shot reaction drive
 I profess that I have not the least personal interest in endeavoring to promote the necessary work; having no other motive than the public good of my country, the advancement of our technology, providing for the satellite industry, relieving the cost burden on space access; and giving some pleasure to the inevitable sponsoring government agencies.* I think I shall now go forth and gather a group of devoted amateurs to develop this crucial technology. Perhaps create an email list for people devoted to find affordable, safe, and accessible methods of building such a device. I will call it the amateur stored energy shot reaction driver society or aSesrds for short. Anyone who wishes to use these ideas for the betterment of society can have them for a single penny.
Lloyd
* Paraphrase from A modest Proposal, Jonathan Swift
***
PS: The system name of aSesrds is somewhat unwieldy and one Benjamin Brockert has suggests a superior alternative. In his words:

“If each of the initial elastic masses are made of convenient in-situ earthen resources, we might call each a ‘rock’ from its Terran origins.

If then we make the whole system smaller, as you propose, the unit item might be called the same name with a diminutive suffix, perhaps the ‘rock-ette’. As is in favor in these times, a phonetic simplification could be something like ‘rocket’.”

42 thoughts on “A Modest Non-Rocket Launch Proposal”

  1. Hey there this is kind of of off topic but I was wondering if blogs use
    WYSIWYG editors or if you have to manually code with HTML.
    I’m starting a blog soon but have no coding knowledge so I wanted to get guidance
    from someone with experience. Any help would be
    enormously appreciated!

  2. Aw, this was a really nice post. Spending some time and
    actual effort to produce a great article… but what can I say… I procrastinate
    a lot and never seem to get nearly anything done.

  3. We stumbled over here coming from a different page and thought
    I should check things out. I like what I see so i am just following you.
    Look forward to going over your web page for a second time.

  4. My relatives always say that I am killing my time here at
    net, except I know I am getting familiarity all the time by reading such good posts.

  5. Hi there! This is my first comment here so I
    just wanted to give a quick shout out and tell you I truly enjoy reading through your blog posts.
    Can you suggest any other blogs/websites/forums that cover the same topics?
    Thank you!

  6. What’s up Dear, are you actually visiting this site regularly, if so afterward you will without doubt
    take fastidious experience.

  7. I blog quite often and I genuinely appreciate your information. The article has truly peaked my interest.

    I will take a note of your blog and keep checking for
    new information about once per week. I subscribed to your RSS feed
    too.

  9. magnificent points altogether, you simply received a brand new reader.
    What might you recommend in regards to your post that you made a few days ago?
    Any certain?

  38. Greetings from Ohio! I’m bored at work so
    I decided to browse your website on my iphone during lunch break.
    I love the information you provide here and can’t wait to take a look when I
    get home. I’m surprised at how fast your blog loaded on my cell phone ..
    I’m not even using WIFI, just 3G .. Anyways, excellent site!

Comments are closed.